The Kuhler H600 Pro all-in-one liquid CPU cooler delivers high cooling performance in an easy-to-install package. To achieve the best results when used with overclocked processors, the H600 Pro is equipped with a large copper plate that efficiently transfers heat from your Intel or AMD processor to the radiator’s ultra-fine heat fins, helping to effectively dissipate heat. The 7-blade PWM fan with Blue LEDS cool the liquid rapidly and quietly, and the three-phase liquid pump engine operates for maximum pump speed and cooling cycles. Backed by a five-year warranty, the H600 pro balances value, quality, and reliability like none other. If you want efficiency, high performance and great build quality to meet the demands of your gaming system, look no further than the H600 Pro.
In addition to easy installation, a powerful, yet quiet fan pushes air through directional blades and channels it through the radiator for optimal cooling. The Antec KUHLER H2O H600 Pro delivers liquid cooling performance at an air cooling price.
- High-density array of only 0.15 mm thin Micro Heat Channels with 0.2 mm space in between them
- Whisper-quiet operation with an incredible lifetime operation
- Heavy-Duty Graphite bearing for a long and whisper-quiet life time
- Blue LED fan included
- SATA style power cable for excellent cable management
Although the H600 Pro has a more "industrial" look compared to its predecessors the end result is one we've seen many times in the past so once again we see a radiator connected to a pump/waterblock combo via two tubes.
The radiator measures 155mm in length, 120mm in width and 27mm in height (thickness).
Along with the Kuhler H600 Pro inside the package you will also find the 120mm PWM LED fan, thermal paste tube. two small plastic bags with 4 long and 4 short fan mounting screws, installation instructions, backplate and all the necessary bits and pieces to install the cooler onto INTEL LGA 775/1150/1151/1155/1156/1366/2011 and AMD AM2/AM2+/AM3/AM3+/FM1/FM2 mainboards.
The pump is powered by 3-pin header and a SATA cable with a near edge to edge copper cold plate to maximize the contact area for optimum heat absorption. You need to apply a thermal paste before installing this unit since it doesn't come with a pre-applied thermal compound.
- Noise Level Range of Fan: 16~35dBA
- Fan Speed: 600-2400RPM
- Radiator Dimensions: 155mm x 120mmx 27mm
- Fan Size: 120mm x 120mm x 25mm
- Tube Length: 315mm
To view full Specifications visit the website: